Quote:
Originally Posted by kasrawiz  Good info bro thanks |
COM3 [VCP1] selected
Device: Fly-SL500i
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "sp-unlock"
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B02:8B01]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:63B6:B875
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72.BIN
ver. sw2: SL900A.05C.W06.08.MP.V72, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72.BIN]...
file saved: C:\Program Files\InfinityBox\MModule\eeprom[SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72.BIN]_20081011-085852.B0E.bin
flash: 89881500010001:89881500000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
detecting additional parameters...
.................................
flash: 89881500010001:89881500000000
flash: 89881500010001:89881500000000
Write: area 0/1
...............................
additional parameters detected Ok
Special operation Done
Write...
flash: 89881500010001:89881500000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 473 sec
Remove/Install battery now !