COM22 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:CD41:CD24
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.4DF40BA7.[V830_E44_PCB01_GPRS_MT6226_S01.369_SUM_KGM526A0_1_ 1.BIN_BF973831].rpl
====================
New firmware detected:
V830_E44_PCB01_GPRS_MT6226_S01.369_SUM_KGM526A0_1_ 1.BIN
- make "Read full flash" operation
- send "system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 4DF40BA7
identification#1 protocol ver: 04
ver. sw1: V830_E44_PCB01_GPRS_MT6226_S01.369_SUM_KGM526A0_1_ 1.BIN
ver. sw2: V830_E44.369.SUM.KGM526A0_1.1, CEC76840
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00710000
Detected eeprom/ffs address is non-standard: 00710000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00710000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 008F0000
ffs chip: 00
eeprom/ffs area: 00000000:00710000-00FFFFFF
detecting ffs structure pass 1...
..................
detect standard fat location pass #1...
.............................
detect extended fat location pass #1...
.............................
fat location can't be detected
ffs element #1 detection failed
detecting ffs structure pass 2...
..................
detect standard fat location pass #1...
.............................
detect extended fat location pass #1...
.............................
fat location can't be detected
ffs element #2 detection failed
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_4DF40BA7_V830_E44_PCB01_GPRS_MT6226_S01. 369_SUM_KGM526A0_1_1.BIN_BF973831_20081013-110335.B0X.bin
Finished, time used: 178 sec
Remove/Install battery now !
i need flash file chinese 6280 rm-78