[syed.n]

software version: 1.14
cable type: 2x6 (L12B)
platform: PMB: Infineon e-gold
searching adapter at COM8...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:3 Tx:10
time required: 15 sec
Power On !
saved: sigmatel_Q7



==== log opened: [10/14/2008 9:47:45 PM] ====
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.52
S/N: xxxxxxxxxxxx
Wait...
Current model: Avvio-103A
Ready
COM8 ready
Current model: Coral-200
==== log: [10/14/2008 9:48:21 PM] ====
COM8 [VCP0] selected
Device: Coral-200
Checking data, wait...
Action: reset
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sta_20081014-214836.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sec_20081014-214840.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-complete_20081014-214848.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Write Done
Finished, Remove/Install battery now !
Time used: 30 sec

backup file will be upload soon.
regards!