| No errors show, flash ok. But when I try to power on (holding the power button) the phone show startup logo and power off.
Then try format or FFS erase, etc... and same problem, phone alweys restart.
__________________________________________________ ________________
COM12 [VCP0] selected
Device: Alcatel-OT-C700A
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
enhanced security fix enabled
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:E4C6:A000
high speed disabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22312200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Celular\InfinityBox\MModule\backup_security\id. 018D9375.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V24.BIN_70B772E8].rpl
identification#1 detection finished
device-id: 018D9375
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V24.BIN
ver. sw2: MAUI.06A.W06.52.SP1.V24, 178D488F
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: disabled
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
original imei: 01129000108850
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
security area (code #1) calculation...
done
file saved: C:\Celular\InfinityBox\MModule\backup_security\sys tem_log_018D9375_JRD26_06A_PCB01_GPRS_MT6226_S02.M AUI_06A_W06_52_SP1_V24.BIN_70B772E8_20081015-165326.B0X.bin
Area: Firmware
flash: 01227E22312200:2BEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CD34GF01
customization area adjusted: CD34GF01
done
flash: 01227E22312200:2BEA0000000000
flash: 01227E22312200:2BEA0000000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
..................counter: 01
done
flash: 01227E22312200:2BEA0000000000
flash: 01227E22312200:2BEA0000000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization...
formatting...
flash: 01227E22312200:2BEA0000000000
Finalization Done
file saved: C:\Celular\InfinityBox\MModule\backup_security\sys tem_log_018D9375_JRD26_06A_PCB01_GPRS_MT6226_S02.M AUI_06A_W06_52_SP1_V24.BIN_70B772E8_20081015-165555.B0X.bin
Finished, time used: 193 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
__________________________________________________ _____
Escuse my english. |