[Tadiwa]

i have this phone model A1308 asking for security code i tried formating and unlocking , also user code function but no hope can somebody help here is log:-

COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "user code"
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:5D03:0005
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: RATECH25_GEMINI_PCB01_GPRS_MT6225_S00.S210BGR.25.S M.BTM_GEMINI_HSD_V001.C18.GB_0001.BIN
ver. sw2: HSD_V001.C18.GB, 00000000
ffs offset/size: 00E00000/00200000
detecting security area (code #2)...
.................................................. .................................................. ............................
security area (code #2) is absent
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
......................
detect standard fat location pass #1...
...............................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[RATECH25_GEMINI_PCB01_GPRS_MT6225_S00.S210BGR.25.S M.BTM_GEMINI_HSD_V001.C18.GB_0001.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[RATECH25_GEMINI_PCB01_GPRS_MT6225_S00.S210BGR.25.S M.BTM_GEMINI_HSD_V001.C18.GB_0001.BIN]_20081022-094343.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
Special operation Done
Write...
flash: EC257E25082501:18E59F00000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 351 sec
Remove/Install battery now !