View Single Post
Old 10-23-2008, 08:22   #1 (permalink)
digitized
No Life Poster
 
digitized's Avatar
 
Join Date: Jul 2005
Location: ludhiana~india
Age: 34
Posts: 1,463
Member: 163833
Status: Offline
Sonork: 100.1579554
Thanks Meter: 5,694
problem with pin finder.

i have problem with my pin finder it always show me this type of error....


Application: C:\Program Files\InfinityBox\PinFinder\PinFinder.exe
Initializing...
software version: 1.14
Smart-Card S/N: 37DA
Smart-Card firmware version: 0111
Initializing PinFinder...
Initializing database...
base database version: 01
user database version: 01
Loading configuration...
Initializing cable list...
Initializing platforms...
Initialization finished
searching adapter at COM4...
adapter found, version: 2000
Serial No: *******************
done
Initializing...
done
Cable: 2x5 (L10B)
software version: 1.14
cable type: 2x5 (L10B)
platform: MT: MT62xx (autodetect)
searching adapter at COM4...
adapter found, version: 2000
pins: 10, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
too many retries
too many retries
too many retries
connection w/adapter lost during set Tx as pin 6
failed to detect pins
time required: 7 sec
too many retries
too many retries
too many retries
Power On !




then if i again try to find it it show me this type of error and does not detect adapter..then i have to restart whole software....plz guide where is problem..... it is box problem or some settings ha done ....plz guide me ...


software version: 1.14
cable type: 2x5 (L10B)
platform: MT: MT62xx (autodetect)
searching adapter at COM4...
too many retries
can't find adapter
too many retries
too many retries
Power On !
  Reply With Quote
 
Page generated in 0.11213 seconds with 6 queries