Hi,
If your UFS box not have an original HWK chipset attached, there still could be some errors in communications due to wrong updates of UFS firmware (let's call this "Saras/Odia clones paranoia").
So, for users with UFS boxes without original HWK chipset inside, follow this procedure to ensure right firmware update:
Step 1:
- Run UFS3Tool.exe (can download from here:
http://www.bb5king.com/files/ufs3tools.exe)
- Plug your UFS box and click Connect button.
- Select "fw V2.6 (last)"
- Check (mark) Write Firmware, Write Eeprom and Write 93c46
- Click "Fix & Update" button
Step 2:
- Disconnect UFS box from USB cable and reconnect again
- Press Connect button
- Check (mark) ONLY Write Firmware
- Click "Fix & Update" button
You have a downgraded UFS box with v2.5 firmware now.
Step 3:
- To properly upgrade back to v2.6, run UFS_DCTxBB5.exe - DCTxBB5 TOOLS v.2.0.1. HWK by SarasSoft or higher, you can use either original or patched.
If you not have any of this installed, can download from here UFS Suite Setup v3.1:
http://www.bb5king.com/files/UFS_Suite_Setup_v3.1.zip
- After started UFS_DCTxBB5 press Connect and on Warning Message choose YES.
Now, your UFS box firmware is properly upgraded and ready for use.
BR,
Manole