View Single Post
Old 11-29-2008, 09:13   #2 (permalink)
Product Supporter
GSM_Support's Avatar
Join Date: Feb 2005
Location: GSMserver Team
Posts: 34,330
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 73,609
Originally Posted by chris2007
i used "S_E J100DMTool" to unlock my j100i can't unlock by smart-clip
What do you mean, you can't unlock it with Smart-Clip? This model is supported by "one button" operation.
  1. Power off the phone.
  2. Connect the Clip to the phone using RJ45 cable (see pinout schematic below).
  3. Press UNLOCK button.
  4. Press Power button on the phone within 5 seconds after you press UNLOCK button on the Clip. RX/TX leds will blink.
  5. E/G led will glow green on success.*

* After successful unlock (green led on) phones with inserted sim card may ask for PCK or NCK code. Enter 00000000 ("zero" 8 times).

And here is the required cable pinout.

Best Regards
GSMServer team

  Reply With Quote
Page generated in 0.13984 seconds with 6 queries