View Single Post
Old 11-30-2008, 22:36   #3 (permalink)
chris2007
No Life Poster
 
Join Date: Feb 2007
Posts: 3,093
Member: 453916
Status: Offline
Sonork: 100.1620840
Thanks Meter: 230
Red face

1- Phone ask for "Phone Lock code"
SW Ver : R1C004
dsfRev:R2A CXC1250386_lp_HONGKONG_r1c004
  1. Power off the phone.
  2. Connect the Clip to the phone using RJ45 cable i Press UNLOCK button.
  3. Press Power button on the phone within 5 seconds after i press UNLOCK button on the Clip. RX/TX leds is blink.
  4. E/G led glow red.
The cable is ok!

Phone can't unlock

2-Phone ask for "Subsidy pwd:"
SW Ver: R10009
dsfRev:R2C CXC1250396_lp_EU2_R10009
  1. Power off the phone.
  2. Connect the Clip to the phone using RJ45 cable i Press UNLOCK button.
  3. Press Power button on the phone within 5 seconds after i press UNLOCK button on the Clip. RX/TX leds is blink.
  4. E/G led glow green.
by using the same cable but insert sim still ask for the "Subsidy pwd:" enter "0000" can't be unlock
  Reply With Quote
 
Page generated in 0.12523 seconds with 6 queries