GSM-Forum - View Single Post

NAVEED74 · 12-17-2008, 09:53

I am posting log. i cannot figure out its software problem or hardware. plz check and tell me. thanks:

Getting MCU ID
MCU ID: 0x0120
FLASH ID0: 74888900 <=> Flash ID not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 01000000 <=> Flash -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 03.35
15-02-02
NPM-9
(c) NMP.
HW version: 0500
PCI version:
UEM version: 36
UPP version: 288
RFIC version: 0104
DSP version: G4.0-4.35
LCD version: SEIKO 0
PPM version: V 03.35
15-02-02
NPM-9
(c) NMP.
T
Production serial number: 5BA209953
Product code: 0507109
Module code:
Basic production code: 0506143
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
IMEI plain: 350697401771174
IMEI spare to net: 3A 05 96 47 10 77 11 07
IMEI SV to net: 33 05 96 47 10 77 11 17 F9
PDC: 4E 54 54 4A 50 12 34 56
Master Code: 7344426517
Phone type: NPM-9, Software version: 03.35, Language Pack: T
User code: 12345
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_NPM-9.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0507109
Checking path: C:\Program Files\Nokia\Phoenix\Products\NPM-9\
Scanning for ini files...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\NPM-9\npm96103.350
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\NPM-9\npm96103.35s
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Chinese S,Chinese T,Bahasa Mal,Vietnamese
Done!

If i do the self test all ok showing except: ST_IR_IF test that is Fail.

I change Antenna switch
I change VCO from 2300 old set
I change RF Processor
I change 26 MHz
I change all filters

But result still same. I dont have frequency counter. so plz if can help regarding this .

I full erase and falsh already on that part everything is ok. write pm files also.

Any other suggestion.

12-17-2008, 09:53	#1 (permalink)
NAVEED74 No Life Poster Join Date: Oct 2005 Location: lahore Posts: 516 Member: 188574 Status: Offline Sonork: 100.1590742 Thanks Meter: 751	6510 network problem I am posting log. i cannot figure out its software problem or hardware. plz check and tell me. thanks: Getting MCU ID MCU ID: 0x0120 FLASH ID0: 74888900 <=> Flash ID not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10 FLASH ID1: 01000000 <=> Flash -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0 First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14 Checking RAM for ALGO... Algo is ready... Checking FAID calculation... P-key nokia module version 01.02 Done! Phone Restarted... FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE ADSP Flash file: NONE APE Variant file: NONE APE User Flash file: NONE Switching to serial... Powering the phone... Reading... MCU SW version: V 03.35 15-02-02 NPM-9 (c) NMP. HW version: 0500 PCI version: UEM version: 36 UPP version: 288 RFIC version: 0104 DSP version: G4.0-4.35 LCD version: SEIKO 0 PPM version: V 03.35 15-02-02 NPM-9 (c) NMP. T Production serial number: 5BA209953 Product code: 0507109 Module code: Basic production code: 0506143 Flash code: Order number: Product specific data: Long production SN: ATO: IMEI plain: 350697401771174 IMEI spare to net: 3A 05 96 47 10 77 11 07 IMEI SV to net: 33 05 96 47 10 77 11 17 F9 PDC: 4E 54 54 4A 50 12 34 56 Master Code: 7344426517 Phone type: NPM-9, Software version: 03.35, Language Pack: T User code: 12345 Block 1: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 2: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 3: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 4: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 5: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 6: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 7: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Searching for saved ini... Checking for file C:\Program Files\ODEON\JAF\JAF_NPM-9.ini Saved INI not found, loading INI list... Setting local mode... Reading product code... Product Code: 0507109 Checking path: C:\Program Files\Nokia\Phoenix\Products\NPM-9\ Scanning for ini files... FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\NPM-9\npm96103.350 PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\NPM-9\npm96103.35s CNT Flash file: NONE ADSP Flash file: NONE APE Variant file: NONE APE User Flash file: NONE Languages in ppm: English,Chinese S,Chinese T,Bahasa Mal,Vietnamese Done! If i do the self test all ok showing except: ST_IR_IF test that is Fail. I change Antenna switch I change VCO from 2300 old set I change RF Processor I change 26 MHz I change all filters But result still same. I dont have frequency counter. so plz if can help regarding this . I full erase and falsh already on that part everything is ok. write pm files also. Any other suggestion.