NEW FIRMWARE DETECTED ON INFINITY ZTC -ZT668 MODEL.
HEAR IS PINOUT:- RX-12 TX-13 CABLE-L20A HEAR IS LOG:-
COM2 [VCP0] selected
module v2.72
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:FC03:0008
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.310F7E31.[MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_09 .BIN_621AFB5E].rpl
New firmware detected (2.72) :
MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_09 .BIN
- make "Read full flash" operation
- send "system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 310F7E31
identification#1 protocol ver: 04
ver. sw 1: MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_09 .BIN
ver. sw 2: MAUI.06B.W07.12.09, A104E59D
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_09 .BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_09 .BIN]_20081223-220804.B0E.bin
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_310F7E31_MTK25_06B_PCB01_GPRS_MT6225_S00 .MAUI_06B_W07_12_09.BIN_621AFB5E_20081223-220818.B0X.bin
Finished, time used: 112 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !