GSM-Forum - View Single Post

plh8100 · 01-14-2009, 20:34

Hi any one got any idea, I have unlocked this Moto W375 but when checked out its not unlocked.

The Log:

SmartMoto 3.20
S-Card: 1xxxxxxxx Smart-Clip dongle, v 2.10, assigned Smart-Clip: 1778xxxxx Europe, initializing... OK
Waiting for the phone to power on...OK
Sending boot...OK
Software version: 0.0.62
Hardware version: MOTOROLA_H80S
Language pack: 62
Eeprom imei: 353003011514210
Hardware IMEI: 353003011514210
Manufacturer: Intel, Model: 28F128L30T
Unlocking phone...OK
Turning phone off

I assumed the phone was unlocked. This W375 was on O2 I have just put an Orange sim in and it asks for ENTER UNLOCK CODE When I turn off the phone just before the screen goes blank it says ORANGE and shows 3 bars of signal.

Can I confirm the procedure I used:

1] connect USB - Jack cable (T191) to phone and USB port (41) on PC

2] start up smart moto

3] on phone connection select computer COM ports

4] select compal models

5] select phone model W375

6] select the COM port ie COM41

7] The Red PWR led is on and the E/G Green led is on

8] on smart moto click on UNLOCK

(I have also tried at a different time pressing the UNLOCK on on the Smart Clip, this just made the E/G led turn red)

9] Press power on on phone 1/2 seconds software say OK - wait

10] smart moto says Unlocking phone...OK. Turning phone off

During this process the Smart clip LEDs stay Red (PWR) and Green (E/G) The RX and TX led do nothing, this is clicking on Smart Clip software unlock If I press Smart Clip Unlock button the PWR led is on Red and the E/G led is on also Red. the RX and TX led do nothing.

All drivers are correctly installed

It says its unlocked but is not?????????

01-14-2009, 20:34	#1 (permalink)
plh8100 Freak Poster Join Date: Jul 2008 Location: United Kingdom Posts: 384 Member: 805663 Status: Offline Sonork: 100.1612157 Thanks Meter: 40	W375 Unlocked but not unlocked???? Hi any one got any idea, I have unlocked this Moto W375 but when checked out its not unlocked. The Log: SmartMoto 3.20 S-Card: 1xxxxxxxx Smart-Clip dongle, v 2.10, assigned Smart-Clip: 1778xxxxx Europe, initializing... OK Waiting for the phone to power on...OK Sending boot...OK Software version: 0.0.62 Hardware version: MOTOROLA_H80S Language pack: 62 Eeprom imei: 353003011514210 Hardware IMEI: 353003011514210 Manufacturer: Intel, Model: 28F128L30T Unlocking phone...OK Turning phone off I assumed the phone was unlocked. This W375 was on O2 I have just put an Orange sim in and it asks for ENTER UNLOCK CODE When I turn off the phone just before the screen goes blank it says ORANGE and shows 3 bars of signal. Can I confirm the procedure I used: 1] connect USB - Jack cable (T191) to phone and USB port (41) on PC 2] start up smart moto 3] on phone connection select computer COM ports 4] select compal models 5] select phone model W375 6] select the COM port ie COM41 7] The Red PWR led is on and the E/G Green led is on 8] on smart moto click on UNLOCK (I have also tried at a different time pressing the UNLOCK on on the Smart Clip, this just made the E/G led turn red) 9] Press power on on phone 1/2 seconds software say OK - wait 10] smart moto says Unlocking phone...OK. Turning phone off During this process the Smart clip LEDs stay Red (PWR) and Green (E/G) The RX and TX led do nothing, this is clicking on Smart Clip software unlock If I press Smart Clip Unlock button the PWR led is on Red and the E/G led is on also Red. the RX and TX led do nothing. All drivers are correctly installed It says its unlocked but is not?????????