View Single Post
Old 06-17-2003, 01:07   #1 (permalink)
erogsm
No Life Poster
 
Join Date: Jul 2001
Location: EU
Posts: 571
Member: 5423
Status: Offline
Thanks Meter: 10
Why,why,why,why!!!

Dear friends,
please could someone tell me what is wrong.
I used normal F/Mbus cable, and with Rolis 1.8 I can read phone info (i.e.3310), and with the same cable can't read phone info of DTC4(3510) with bWinlock 1.0.6 from B-phreaks.
Always get "unable to read phone info".
The same message get also if I don't connect cable to 3510.
I tried connect external 5V to max232 but always a same.
I used correct F/Mbus cable (PIN10 of chip connect via diode to RX and via resistor 1KOhm to Tx, Pin 9 of chip direct connect to RX).
But don't think that is cable errors, because without cable when I started program bWinlock 1.0.6 get the same message above.
I used Win98.
Please I really ask for help.
I searched on forum and don't found answer.
Please still one more help me
Regards to all
  Reply With Quote
 
Page generated in 0.15540 seconds with 6 queries