[InfinityN]

Originally Posted by charletan

COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "format ffs"
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:85E6:3406
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.088E81D3.[E558_ZK2ARTF_E558_GPRS_MT6226_S01.01_1.BIN_0570D15 5].rpl
identification#1 detection finished
device-id: 088E81D3
identification#1 protocol ver: 04
ver. sw1: E558_ZK2ARTF_E558_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E558_ZK2ARTF.01.1, AA2E8FFA
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00800000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00800000
ffs chip: 00
eeprom/ffs area: 00000000:00800000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[E558_ZK2ARTF_E558_GPRS_MT6226_S01.01_1.BIN]...
warning: wrong data size at 0x00A23800, retry...
read error recovered
warning: wrong cs at 0x00B62800, retry...
read error recovered
file saved: D:\Program Files\InfinityBox\ChineseMiracle\eeprom[E558_ZK2ARTF_E558_GPRS_MT6226_S01.01_1.BIN]_20090309-155101.B0E.bin
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:29EA0000000000
Finalization Fail
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_088E81D3_E558_ZK2ARTF_E558_GPRS_MT6226_S 01.01_1.BIN_0570D155_20090309-155112.B0X.bin
Finished, time used: 411 sec
Remove/Install battery now !

Do you have original full flash backup ?