1: open Setool
2: select model
3: select USB interface
4: go to setting TAB and check
Sign Mode.............. (Use server)
Do full unlock instead of user code
5: click on unlock & Repair
6: hold "C" and insert USB cable (if Require install Driver SEtool Main folder\Driver\USB_Flash _Driver)
7: when appear a message(Disconnect phone Power ON and insert sim.......etc)
now you need TEST CARD
8: insert TEST CARD power ON the phone
9: connect phone (if Require install Modem Drivers) select phone mode
10: an other message will appears (disconnect phone remove battery press ready etc..........)
so disconnect your phone remove battery and reinsert again
hold "C" and connect again
after a moment
you will get
UNLOCK DONE message
WBR
G S M - D O C T O R |