View Single Post
Old 04-18-2009, 09:35   #3 (permalink)
InfinitySupport
Product Manager
 
Join Date: Mar 2005
Location: infinity-box
Posts: 38,635
Member: 130995
Status: Offline
Thanks Meter: 35,229
Quote:
Originally Posted by omnitech View Post
hi everyone,

i got one i-mobile 903 this phone had phone lock code also network lock, tried infinity software can detech the phone but cant do any unlock and usercode reset, infinity support had one file to flash but dont know how to flash, pls advice thanks in advance
Hello,

How to write flash (upgrade/downgrade firmware, change language):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Flash" page and load required files
8. press "Write" button and follow instruction given by software


How to read flash:

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "Read flash" (or "Read full flash") button and follow instruction given by software


How to unlock (remove sp-lock, provider lock etc.):

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. press "SP-Unlock" button and follow instruction given by software


How to reset/format ffs (reset setting to default values, repair freez/restart etc.):
- at first try to make "safe format" (if this option exist)
- if "safe" option is not works try to make "complete" format (if this option exist)

1. connect cable from box to device
2. run "Infinity-Box Shell" software
3. select required model
4. run required software module
5. select required model (if need)
6. go to software "Settings" page and select COM port
7. go to software "Service" page
8. select format mode "safe" or "complete" (if mode is available)
9. press "Reset" or "Format" button and follow instruction given by software
  Reply With Quote
 
Page generated in 0.06959 seconds with 7 queries