Quote:
Originally Posted by /\/\A/\/| DON  sir here is logs i checked after change imei but my problem is not solved
COM4 selected
module v2.81
Action: touchscreen calibration
mode: 4
Calibration order: reverse
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:EF03:0009
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M6225_00J6_HLD2_00_v03
Version: MT6225_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35044801123456
connection Ok
detecting structure #5 (mode-4)...
8 7 3 2error:
detection failed (4 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 7 sec |
dear brohter....I always face this problem........but solution...is........
repeat the same mode......twice or three time ...
some mode gives error box and after this you can not close the window.Close the windiw in task manager and try again..
I also repair this with many time repeating... do not worry about this... try again and again until it removes.....