I get mobile in dead condition.after format it alive but stuck on touchscreen calibration.
Already tried all 5 modes of touchscreen calibration but still fails...
Already format many times and repeat calibration process but still fails..
Code:
COM5 [VCP0] selected
module v2.80
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:FB54:2FB0
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: LION6_01_26B_YR_L2SM_214_070920_LD-TR0_OV0_SS75_CTF_BT
Version: CKT26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-5)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 12 sec
Remove/Install battery now !
Here's full flash backup of unit......
http://rapidshare.com/files/22976253...T.BIN__20.html Supporters help me to sort that problem as soon as possible.