| problem with chinese xtelecom X3128
hello !!!infinity team m having problem with chinese fone x3128 xtelecom
it is sssaying eeprom or ffs area not correct i press yes
mostly sets are powered on with complete formatting but this one is not going to power on
the version of this fone is this:
::E506_B25_PCB01_GPRS_MT6226_S01.00_0.BIN
i make full format but no succes
then i flashed the fone with this firmware on support of infinity box
:::E506_B25_PCB01_GPRS_MT6226_S01.00_0_16m_En_Ru_A r.B0M.bin
but no succes need help regarding this phone
==== log: [5/11/2009 4:47:05 PM] ====
COM3 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:2AC1:06C2
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.71F37329.[E506_B25_PCB01_GPRS_MT6226_S01.00_0.BIN_9713BC0D].rpl
identification#1 detection finished
device-id: 71F37329
identification#1 protocol ver: 04
ver. sw 1: E506_B25_PCB01_GPRS_MT6226_S01.00_0.BIN
ver. sw 2: E506_B25.00.0, F243EC68
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect ffs/eeprom area
Do you want to use standard ffs/eeprom address: 00800000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs/eeprom address selected by user
detecting ffs/eeprom size...
ffs/eeprom size: 00800000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00800000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\E 506_B25_PCB01_GPRS_MT6226_S01.00_0__system_log_71F 37329_9713BC0D_20090511-165039.B0X.bin
Finished, time used: 194 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure ! |