View Single Post
Old 05-24-2009, 22:09   #102 (permalink)
doctorfleming
Freak Poster
 
Join Date: Dec 2003
Posts: 148
Member: 46826
Status: Offline
Thanks Meter: 3
Quote:
Originally Posted by sherry_mobiles View Post
Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.09v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.43v PASSED
VBAT Voltage 4.82v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 7 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
Failed to read PM -> Failed to read PM Record 308,1
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_20.0.016_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CFD95, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 32.734s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.453s
Restarting MCU...
Processing RM-320_20.0.016_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00001000, NAND
EraseArea[0,APE]: 0x0000D800-0x0000EA00, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 99.188s
Restarting MCU...
Processing RM-320_20.0.016_PR.v22 (CMT)...
Processing RM-320_20.0.016_PR.v22 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM-320_20.0.016_PR.v22, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.625s
Restarting MCU...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (CMT)...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:   C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:   00000295
CMT_EM_ASIC_ID:   00000B22
CMT_PUBLIC_ID:   03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:   A8C1D6713E691FF8
RM320_20.0.008_018_xxx_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.656s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 24.641s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06wk41v51.3
MCU Date 13-02-08
Product  RM-320
Manufacturer (c) Nokia
IMEI  12345610654321?
IMEI Spare 1A32541660452301
IMEI SV  1332541660452301F4000000
PPM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , •$RM320_20.0.008_018_xxx_U03, •RM320_020_000_M011 , 
CNT  RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
PSN  0
PSD  0000000000000000
LPSN  0
APE SW  20.0.016
APE Variant 20.0.01622.01
APE Test  rm320_eno_2007wk45v0.020
APE HW  1
APE ADSP 256
APE BT  HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU  15
TAHVO  22
AHNE  11
HW  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , •$RM320_20.0.008_018_xxx_U03, •RM320_020_000_M011 , 
PCI  i20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , •$RM320_20.0.008_018_xxx_U03, •RM320_020_000_M011 , 
UEM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
UPP  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , 
RFIC  17141715
Failed to read info -> Failed to read extended info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
B.R
SHERRY MOBILES

Friend look at the error you have to release phone


IMEI 12345610654321?
IMEI Spare 1A32541660452301

Last edited by ptt; 01-17-2010 at 01:50. Reason: add code tag
  Reply With Quote
 
Page generated in 0.13516 seconds with 6 queries