[elhadjioumar]

Originally Posted by Mcnbox

Regarding SPD 6600 Series CPU working with Mcnpro Box. ( of course still very easy to play )



1. All most 6600 Series CPU normal we are using USB Scan detect.

2. If always found "Unknow USB device" etc. which means your operation is wrong , and phone still did not connect well .

3. The Right Operation:

• Connect phone via USB cable, put on power cable "+" "-" to phone battery connector via adaptor ( The red and black one, no need battery )
• Start to " USB Scan " , No need to power on the phone , holding power on key and press " Read status " , Often we scan 2 times to be sure the scan result which is correct.
• Then start to find " charge Pin " ( The operate Just follow the window , detect each pin we 'd better waiting 10s ).
• Other option of the delaytime, normal i setting to 800 , which is Phone power on delayed time .
• Finish those step , We can press " Start " to Scan phone now .
• After Computor will be tell you found new device and start to install driver. then can Apply the scan result.

4. Finish Scan , then you can doing Flash , Unlock etc.


if you can have problem , Please post here , let's help you around !


Best Regards !

Mcnbox Team.

ok after scan i install corectly the drivers but the optons of spd stay inactive on the soft .I cannot read or unlock ......what is wrong ?