Quote:
Originally Posted by astana2007  Start...
Boots Already loaded!
SIEMENS A62 lg98 Sw07
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: AB9CC9EB -> PhoneID: EBC99CAB
OTP IMEI: 358000001138047
HASH: 0CC25AB08D5DEE70C8E0FDD85F622F13
Use OTP IMEI: 358000001138047
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\A62lg98Sw07_EEPROM_090622220343.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
CRC error in transfer buffer or bad RAM! (Block at 0xFC0000).
what kind of error this is boss??? |
...try with this methode:
-select Type; A60/A62, comport 1 or 2, COM Speed: 115200 and bootcore Typ: BCoreBug
- go to SKey menu and click to "Calc SKey. After calculation click on "Send Skey". If is OK, your phone enter in Factory mode (verify in Service Menu-> Service Mode). If give error, you need to cut one track from the seccond layer (click on TP tab to see picture) and repeat this steps in the "Normal" Boot Typ.
dagos