Phone: KD900
KD900_SPREADTRUM_6600ME_CPU_SAMSUNG_K5L2931CAM USB San: Code:
Suggest: Power supply with the tran-clamp to read the pin-status
Scanning pin-status,please waiting...
->.....................................
13,17,18 Short-pin
>>Pin-status Scanning completed
-------------------------------
Scanning,waiting...
->=
Operation completed, Pinout has scnaned out.
USB D-: 9 USB D+: 10
Total time elaps 4 seconds
Testing Stability,waiting...
>>=........
Scaning other BOOT pin,waiting...
>>#=........=...--------------
Operation completed, Pinout has scnaned out.
BOOT: 7 set as (oInvert)
USB D-: 9 USB D+: 10 GND:8 11 12 16
Click 【Save】 to save Pinout
>>If Scanning other phone, please first click 【Stop】
Get phone is SPD 6600M CPU
Code:
>>[V:13 17 18 G:8 11 12 16 D-:9 D+:10] Apply to Box
Set BOOT: 7 set as (oInvert)
Code:
>>[V:13 17 18 G:8 11 12 16 D-:9 D+:10 oI:7] Apply to Box
This step is very important , Apply or saving definition to Box
Now we go to Pinouts , select the cable, and findout the definition you saved in above step.
Check the picture (
When Software detect the phone Out . you can see the software interface at lower right corner, the COM port get changed. the same time you can check in the computer device management control panel the have other port named "SCI USB2Serial" port)
Note: If any mistake in this procedure , Software will be not allow you flash / unlock your phone.
Reading /Backup:
Falsh / unlock phone procedure will be more easily . Just select the files and follow window then can doing.
Video : Download
Best Regards!
Mcnbox Team