View Single Post
Old 08-05-2009, 13:50   #13 (permalink)
Edocomsel
No Life Poster
 
Edocomsel's Avatar
 
Join Date: Aug 2004
Location: E.A.P & E.A.S
Posts: 679
Member: 76239
Status: Offline
Sonork: 100.1584414
Thanks Meter: 210
Donate money to this user
Hello,

Try today :

Standard methode :

COM5 [VCP1] selected
module v2.83
Device: Nexian-NX-G700
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:AA21:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 05
ver. sw 1: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E201B_F M_PR1_IN_V0_7.BIN
ver. sw 2: E201B_FM_PR1_IN_V0.7, 00000000
ffs offset/size: 00E00000/001F8000
ffs address assigned: 00E00000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: Nexian-NX-G700_TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E2 01B_FM_PR1_IN_V0_7__ffs...
file saved: D:\Program Files\InfinityBox\MModule\Nexian-NX-G700_TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E2 01B_FM_PR1_IN_V0_7__ffs_20090805-193932.B0E.bin
flash: 2088C4FFFFFFFF:2088C400000000
Backup required data Done
Patch required data ...
detection procedure, wait...
detection procedure completed
detection procedure, wait...
error: phone is not locked or unknown eeprom
Patch required data Done
Special operation ...
detecting parameters to apply patch area 0/...
.....
flash: 2088C4FFFFFFFF:2088C400000000
flash: 2088C4FFFFFFFF:2088C400000000
Write: area 0/1
.................................................. .........
area 0/ patch applied Ok
Special operation Done
Write ...
flash: 2088C4FFFFFFFF:2088C400000000
Write: eeprom
Write Done
Finalization ...
Finalization Done
Finished, time used: 184 sec
Remove/Install battery now !


OK, but phone still locked ...



Smart Fast methode :

COM5 [VCP1] selected
module v2.83
Action: unlock
unlock method: smart fast
Model: Nexian-NX-G700
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:AA21:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: E201B_FM_PR1_IN_V0.7
Version: TINNO23C_08A_GEMINI_HW
80 byte(s) read
imei: 35332703064288
connection Ok
186 byte(s) read
reading data...
reading data #2...
reading data #4...
reading data #5...
WARNING ! Unknown lock structure !
Read flash and send to support: [email protected]
error: operation failed !
Finished, time used: 11 sec
Remove/Install battery now !


thanks
  Reply With Quote
 
Page generated in 0.08223 seconds with 7 queries