GSM-Forum - View Single Post - 06-11-2011 Hwk Minor Suite v2.2.0.3

MicrostarGSM® · 08-19-2009, 07:08

The Official release is ready in our download area http://sarunasoftware.com

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

You MUST be running HWK software 2.0.9.0 to access support.

UFS_DCTxBB5 v2.0.9.0
----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG GSM V 2.0.9.0
-----------------

1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)

SAMs V 2.0.9.0
---------------

TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540

HWK_Support_Suite_Setup_v02.09.000

HWK_Suite_Setup_v02.09.000

Samsung / Qualcomm USB Drivers can be downloaded here:-

N-Box Old Software UFS Suite

Download Here

Get You own RapidShare Account

www.n-box.org
www.gts-box.org

08-19-2009, 07:08	#14 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	Release Date 18/08/2009 The Official release is ready in our download area http://sarunasoftware.com Please run the upgrade client after you have installed the software, follow the instructions careful. The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:- Programs\SarasSoft\UFS\Utilities\Update Client WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk. Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite. You MUST update your HWK using client 2.0.9.0, old client versions will no longer work. You MUST be running HWK software 2.0.9.0 to access support. UFS_DCTxBB5 v2.0.9.0 ---------------------- 1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483, RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602 (6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2, 6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d) 2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b) 3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF) 4. Corrected VPL parsing for some models (N97) 5. Only NU48F256 left in [1331] option and moved to BB5 Tab. 6. SX4 bypass introduced using temporary NPC certificate erase. 7. [One Boot] option introduced (RAPx based One MCU products) 8. Enabled Files Multiselect, when Writing Certificates. 9. Erase Option for BB5 (for Experts Use Only !) Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG GSM V 2.0.9.0 ----------------- 1. Unlock Codes Display for Infineon EGOLD Voice added (Boot and See NCK Code for Instructions Press UNLOCK) SAMs V 2.0.9.0 --------------- TRIDENT T539 added (DUNL,IM,FL) TRIDENT VISION Fixed MSL algorithm for some models (C3050,...) SWIFT D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT) SWIFT-AEROFONE B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B, E2210B added (DUNL,IM,FL) QUALCOMM Manual Port Selection Added (Use Refresh, After Each Phone Reboot or Reconnect) (Untic QualComm Mode, Before Flashing) F480R,i6210,U900W added. UNLOCK and UNFREEZE added for these models: A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540 HWK_Support_Suite_Setup_v02.09.000 HWK_Suite_Setup_v02.09.000 Samsung / Qualcomm USB Drivers can be downloaded here:- N-Box Old Software UFS Suite Download Here Get You own RapidShare Account www.n-box.org www.gts-box.org Last edited by MicrostarGSM®; 09-08-2009 at 16:22.