View Single Post
Old 08-19-2009, 07:26   #1 (permalink)
jhepoy_org
Freak Poster
 
jhepoy_org's Avatar
 
Join Date: Mar 2006
Location: HP Mnla,Philippines
Age: 38
Posts: 425
Member: 247410
Status: Offline
Thanks Meter: 161
>> My/phone MS28 DUO PHONE CODE DONE <<

Code:
==== log: [8/18/2009 8:19:54 PM] ====
COM9 [VCP0] selected
module  v2.87
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:8324:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: E01C_PHILIPPINES_V7_02
Version: TINNO23C_08A_GEMINI_HW
detecting structure #2...
 1 2 3 5 7 8 9 11 13 done
80 byte(s) read
imei: 35379803006267
connection Ok
detecting structure #1...
 0 3 4 7 8 9 13 14 15 16 19 20 23 24 25 29 30 31error: detection failed (18 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 104 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== log: [8/18/2009 8:25:16 PM] ====
COM9 [VCP0] selected
module  v2.87
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:8324:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: E01C_PHILIPPINES_V7_02
Version: TINNO23C_08A_GEMINI_HW
detecting structure #2...
 1 2 3 5 7 8 9 11 13 done
80 byte(s) read
imei: 35379803006267
connection Ok
building list...
done
items to clear: 142
warning: wrong packet cs
items cleared: 142 of 142
building list...
done
items remains: 0
Finished, time used: 27 sec
Remove/Install battery now !

==== log: [8/18/2009 8:26:48 PM] ====
COM9 [VCP0] selected
module  v2.87
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 358888888888886
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:8324:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: E01C_PHILIPPINES_V7_02
Version: TINNO23C_08A_GEMINI_HW
detecting structure #2...
 1 2 3 5 7 8 9 11 13 done
80 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #2...
 1 2 3 5 7 8 9 11 13 done
80 byte(s) read
verification...
verification done: 35888888888888
Finished, time used: 21 sec
Remove/Install battery now !







  Reply With Quote
The Following 6 Users Say Thank You to jhepoy_org For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.07115 seconds with 7 queries