View Single Post
Old 11-05-2009, 14:14   #3 (permalink)
fr40
Junior Member
 
Join Date: Jun 2005
Age: 44
Posts: 5
Member: 156675
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by ali_imran View Post
ttp://www.4shared.com/file/12240972..._Atma.html?s=1

But its not from the beginning.I am providing the tutorial in text format here.Do the first few steps as it says and follow the video tutorial for clear understanding.
1. Download Firmware and Multiloader from the site first. (i have attached it)
2. Make sure Samsung PC Studio is installed and communicates with your phone
3. Unrar the firmware in a folder you can easily find it.
4. Remove the Sim and MicroSD from your phone and replace the battery.
5. Now press vol top button+camera key+powerbutton at the same time in switch off mode without attaching the datacable.
6. Soon u will see a new screen which says Download.
7. Now attach the datacable to the phone and open Multiloader which u donwloaded earlier.
8. Select the radio button that includes MSM6250/MSM6250A or BRCM2133 for S5230/5233 (Samsung Star)
9. Select Boot Change,Full Download and master rom boxes.
10. Then click Boot, and select the boot files from the unpacked firmware folder.
11. Click the Amss, Rsrc1, and Rsrc2.
12. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
13. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
14. FOTA and ETC fields are left blank.
15. Click the Port Search button, it will find your phone and show the com port is ready.
16. Click the download button and be patient, this will take a few minutes to complete.
17. When it's finished, it will show "ok complete".
18. Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
19. Now with every thing complete, You can perform a hard reset by typing *2767*3855# into the hand set (but not necessary.)
20. When the phone resets type *#1234# into your handset to check your new firmware ver.
your new Firmware is updated and ready to use.But dont flash s5230 firmware with s5233a it will make the phone dead and it will also eliminate the warrenty of your cell.So be careful to use s5233a firmware which is not available free .Its available only for money.

if u any problem pm at yahoo

Br.
Ali.Imran


brother, i try this instrucctions with two phone and are dead. so someone can help me!
  Reply With Quote
 
Page generated in 0.06825 seconds with 7 queries