GSM-Forum - View Single Post

sirnavid2010 · 12-02-2009, 08:44

Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
models count: 23
Welcome to Sgold3 Module!!
Count supported models - 23
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM5 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Preprocessing FLS File....
Starting Flash Applet
Opening "KM900AT-00-V10b-EEU-XXX-MAY-05-2009+2.fls"...
Writing FLS

SP
Sending SEC pack...
Done FLS

SP
Writing FLS:STATIC_EEP
Sending SEC pack...
Done FLS:STATIC_EEP
Writing FLS:CODE
Sending SEC pack...
Writing FLS:CODE
Done FLS:CODE
Writing FLS:CUST_DISK
Sending SEC pack...
Done FLS:CUST_DISK
Writing FLS:ROOT_DISK
Sending SEC pack...
Certificate Failed!

12-02-2009, 08:44	#3 (permalink)
sirnavid2010 No Life Poster Join Date: May 2008 Location: persian Age: 43 Posts: 3,820 Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824	Welcome to LG Infineon SGOLD3 TOOL v2x by NoName® models count: 23 Welcome to Sgold3 Module!! Count supported models - 23 Disconnected. PMB8878 Module 1.0a started. SW: Ver 2.0.0.38 Connecting to KM900 in UART Mode (COM5 ,921600) Please reconnect battery, press and hold power button... Phone found! (MCU:PMB8868) prebooting... Release power button. Booting... Flash ID: FF00FF BOOT Stage Finished , sending authority... Sending SEC pack... Reading ... Analising EEPROM... Preprocessing FLS File.... Starting Flash Applet Opening "KM900AT-00-V10b-EEU-XXX-MAY-05-2009+2.fls"... Writing FLSSP Sending SEC pack... Done FLSSP Writing FLS:STATIC_EEP Sending SEC pack... Done FLS:STATIC_EEP Writing FLS:CODE Sending SEC pack... Writing FLS:CODE Done FLS:CODE Writing FLS:CUST_DISK Sending SEC pack... Done FLS:CUST_DISK Writing FLS:ROOT_DISK Sending SEC pack... Certificate Failed!