View Single Post
Old 12-04-2009, 09:36   #1 (permalink)
pakmobiles
No Life Poster
 
Join Date: Nov 2006
Location: Pakistan
Age: 45
Posts: 1,132
Member: 383211
Status: Offline
Thanks Meter: 131
R268 invalid sim and invalid imei

this mobile on invalid sim but after formating the imei is not dected.i sent u the formating and write imie log and also link of my r268 firmware.please check it
COM9 [VCP0] selected
module v3.02
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
imei write method: mode-3
imei write channel: imei #1 for dual sim/mono CPU
new imei: 353924546677760
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E203:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
slowest
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
rom info protocol ver: 05
ver. sw 1: R268_FN_PCB01_GPRS_MT6225_S00.R268AR_GH_S311_F12_V 05_090729.BIN
ver. sw 2: R268AR_GH_S311_F12_V05_090729, 00000000
code offset: 00000000
ffs offset/size: 00E60000/001A0000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E60000
standard ffs/eeprom offset confirmed: 00E60000
detecting ffs/eeprom size...
ffs/eeprom size: 001A0000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E60000-00FFFFFF
detecting startup code area #2...
.................................................. .................................................. .................................................. .................................................. .................................................. ......
startup code area #2 is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: R268_FN_PCB01_GPRS_MT6225_S00.R268AR_GH_S311_F12_V 05_090729__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\New Folder\R268_FN_PCB01_GPRS_MT6225_S00.R268AR_GH_S31 1_F12_V05_090729__ffs_20091203-203840.B0E.bin
flash: EC257E25082501:2AEA0000000000
Backup required data Done
====> Patch required data ...
imei is not detected !
What to do:
1. Power-On phone
2. wait 20-30 sec
3. Power-Off by "Power" button, don't remove battery !
4. Repeat "repair imei" procedure again
If imei can't be detected:
1. make "complete" ffs/eeprom format
2. Power-On phone
3. wait 20-30 sec
4. Power-Off by "Power" button, don't remove battery !
5. Repeat "repair imei" procedure again
If imei can't be detected: read flash and send to support: [email protected]
Patch required data Fail
Finished, time used: 679 sec
Remove/Install battery now !
Check your country laws before use this option !
In some countries this operation may be prohibited !
You must think serious before continue !
Do you understand above text well and want to continue ?
operation aborted
http://www.4shared.com/file/16520213...6225_S00R.html
  Reply With Quote
 
Page generated in 0.14577 seconds with 7 queries