| Huawei g1157
hi to all there is the log for a huwei G1157
=> module version: v.
=> operation (3) started: COM4
==> get_dll_version
dll version: 38.0i
==> set_com_port
==> set_baud_rate
==> set_v24_mode
==> set_baud_rate
==> check_comm_link
==> get_ms_id
imei: 356334032395603
==> get_sw_version
sw ver: P1.2EN02V01.02
==> get_sec_version
sec ver: 00.3231Et(4242)
==> get_eep_version
eep version: 000C
==> get_eep_revision
eep revision: 0000
==> reading...
access result: 00
access level: 03
==> set required mode...
==> reboot...
==> reading...
lock result: 00
lock status: 020A
==> unlock...
verification result: F06001005612010000010105020503050405020000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
verification result: F0600100561200FF00010105020503050405000000000000
==> restore original mode...
last error: No errors
=> operation finished
==> close_com_port
Finished, time used: 19 sec
Power Off/On phone now !
but it say unlock but it not unlocked
in the back side on the phone i can see
huawei g1157
S/NIH4CAC69A2304332 B |