hello infinity team i all ready asked u this question but no proper reply.again iam asking question brieflyyy.please try to solve my problem.
firts of all some models like N958,,P11,M99... few models have a imei which displays with #06#.and another imei inside the firmware(#2imei).
usually i do for #2imei with mode 1.but for these models when i use mode 1.software shows like in the image.
and when i use mode 2.than also software changes #1 imei.log is below
COM5 [VCP0] selected
module v3.02
Action: imei
imei write method: mode-2
imei write channel: imei #2 for dual sim/mono CPU
new imei: 353923030847095
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9203:0004
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: E880_EVTST.01.0_25S00
Version: EVEN25_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35944402563794
connection Ok
detecting structure #2...
0 done
44 byte(s) read
verification...
verification done: 35392303084709
Finished, time used: 25 sec
Remove/Install battery now !
and finally i used the option ""#1imei(defualt imei inside the firmware)than the log is
COM5 [VCP0] selected
module v3.02
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
imei write channel: imei #1 (default imei inside firmware)
new imei: 357988021566448
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9203:0004
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
====================
New firmware detected (v.3.02, database date: 03.12.2009):
E880_MY1MCF10_E880_GPRS_MT6225_S00.01_2.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
http://rapidshare.com or
http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 04
ver. sw 1: E880_MY1MCF10_E880_GPRS_MT6225_S00.01_2.BIN
ver. sw 2: E880_MY1MCF10.01.2, 00000000
code offset: 00000000
ffs offset/size: 00E00000/001FF000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting startup code area #2...
.................................................. .................................................. .................................................. .................................................. .................................................. ......
startup code area #2 is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: EC257E25082501:18E59F00000000
Backup required data Done
====> Patch required data ...
detecting ffs/eeprom structure pass 2...
...................
detect standard ffs/eeprom location pass #1...
.................................................. ...
detect standard ffs/eeprom offset pass #1...
ffs/eeprom record offset detected
detect standard ffs/eeprom data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok element #2
imei default found: 13579024681122
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
flash: EC257E25082501:18E59F00000000
flash: EC257E25082501:18E59F00000000
Write: imei
error: error# 000000FF
error: flash write error: 004E0000:00002000
error: no any expected answer
error: flash write error: 004E0000:00002000
error: no any expected answer
error: flash write error: 004E0000:00002000
error: no any expected answer
error: flash write error: 004E0000:00002000
error: no any expected answer
error: flash write error: 004E0000:00002000
error: can't write required area
Write Fail
Finished, time used: 232 sec
Remove/Install battery now !