View Single Post
Old 12-16-2009, 10:50   #1 (permalink)
yobb
No Life Poster
 
yobb's Avatar
 
Join Date: Aug 2006
Posts: 1,117
Member: 337450
Status: Offline
Thanks Meter: 718
E52 not supported by MX?

Phone is alive I just want to know if supported for flashing coz everytime i tried to upgrade this kind of phone i encountered this error..

Logs:

UFS interface

[CODE]
Code:
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.11443, Date: 23-11-2009
RAP Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1E500103796003444B21083059395F4AD5EDBAD6
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Sorry, Unable to find bootloader for this RAP ID !
After setting up the config in 8.30.12.34536,
IMEI can't read.


Code:
Using device: J.A.F, FW ver: 01.B1
Library version: 1.0.0.11443, Date: 23-11-2009
RAP Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1E500103796003444B21083059395F4AD5EDBAD6
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
 SecondaryBoot: RAPUv11_2nd.fg [BB5]  version: 1.37.1 revision: 0.0 size: 0x3AC0
 Supported RAP Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
FlashID0: 0020 0040  - 0000 0031 [ST  NAND KAT00F00RA] type: NOR,RAP 
ExtBUSC: 403E C18C F048 DE01 8DD1 EF0E E87C B485 
ExtDEVC: FFFF 0000 - 0000 0000
Flash ID not supported for this loader (RAPUv11_algo_xsr16.fg)
 Algorithm: RAPUv11_algo_xsr16.fg [XSR 1.6]  version: 1.40.0 revision: 0.0 size: 0x2CB60
 Supported RAP Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
RAP PAPUBKEYS is blank/erased.
Original Imei: 00000000000000
Original Product code:
Tried also USB

Code:
Library version: 1.0.0.11443, Date: 23-11-2009
Phone must be switched off, put USB cable to the phone.
Waiting for USB device ...
Connect a CHARGER or Press phone's POWER button and hold for a second please !
[ADL] Pooling for ADL device
[ADL] Device found: nmwcdnsuc\Nokia USB Flashing Generic, ID: 179EBE97
Unknown USB Flashing protocol 
Could not prepare ADL loader, MCU file is needed for this operation!

JAF Reading, seems not supported too ( as expected)

Code:
JAF version 1.98.64
Detected PKEY: 900yobb
Card life counter: 95.75%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.17.0
Changing mode...Done!
Booting phone...
CMT Boot Data:
Asic ID: 000000030000022600010007600C192102011104
Asic Mode ID: 00
Asic EM ID: 00000C30
Asic Public ID: 1E500103796003444B21083059395F4AD5EDBAD6
HASH: 25B977A055BE9B5DEC0C38A2A279C69500000000
ROM ID: 3E273BF637BE26FA
Error finding cmt boot file...
Booting phone...

Cyclone Logs:
can read the phone.

Code:
Booting RAP...
CMT_SYSTEM_ASIC_ID:     000000030000022600010007600C192102011104
CMT_EM_ASIC_ID:         00000C34
CMT_EM_ASIC_ID:         00000C30
CMT_PUBLIC_ID:         1E500103796003444B21083059395F4AD5EDBAD6
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     25B977A055BE9B5DEC0C38A2A279C695
CMT_ROM_ID:         3E273BF637BE26FA
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashContent[0,CMT]: 0001004D00C000C00000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPUv11_algo_xsr16.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.6
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
MCU Version    V ICPR82_09w36.5
MCU Date    09-10-09
Product        RM-469
Manufacturer    (c) Nokia
IMEI        3552160313yobb
Mastercode    5175146330
IMEI Spare    3A551206139yobb
IMEI SV        335512061yobb427F8000000
PSN        MKO732578
Product Code    0592200
Module Code    0203994
Basic Product Code    0565921
PSD        0000000000000000
LPSN        0
WLAN MAC    0026CC032CE1
APE SW        022.009
APE Variant    022.009022.009.14.01022.009.C00.01
APE Test        0.068
APE HW        256
APE ADSP    256
RETU        34
TAHVO        00
AHNE        11
HW        6000
RFIC        |Vapaus_5.1 | ???
DSP        ICPR82_09w36.4_RIO
Simlock Server    SIMLOCK SERVER
Simlock Key    2440700000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [1,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [1,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [2,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [3,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [4,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [5,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [6,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [7,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF

UB logs:
See attached...

That's all reports. Phone has no problem.
Attached Images
File Type: jpg e52.jpg (38.3 KB, 54 views)
 
The Following User Says Thank You to yobb For This Useful Post:
 
Page generated in 0.18222 seconds with 7 queries