GSM-Forum - View Single Post - Step by Step HOW TO USE MCNpro Box (Details with Picture)

tesla88 · 12-28-2009, 15:33

III.How to Flashing via McnPro Box

1.Plug the cable Flash to the Service Cable into McnProBox

2.Please insert cable Flash into the phone and the box

3.Connect the cable power into the phone as the correctly one

4.Double-click icon Mcnpro Box to start run the program

5.Click connect to see the connection box and computer

6.When see some a notification message box connected, that box
and computer already connected well

7.Select RX option, TX scan to see the pins and type CPU

8.In menu Select Chip, select ALL and then click Start to automatically detected type of CPU used by the mobile phone.

9. Scan messages result shows CPU Chipset MTK MT6225 ...
indicates the phone CPU type is MTK.

Next.....................

12-28-2009, 15:33	#3 (permalink)
tesla88 Freak Poster Join Date: Aug 2009 Location: keep on smile Posts: 169 Member: 1096435 Status: Offline Sonork: ---Peace--- Thanks Meter: 658	III.How to Flashing via McnPro Box 1.Plug the cable Flash to the Service Cable into McnProBox 2.Please insert cable Flash into the phone and the box 3.Connect the cable power into the phone as the correctly one 4.Double-click icon Mcnpro Box to start run the program 5.Click connect to see the connection box and computer 6.When see some a notification message box connected, that box and computer already connected well 7.Select RX option, TX scan to see the pins and type CPU 8.In menu Select Chip, select ALL and then click Start to automatically detected type of CPU used by the mobile phone. 9. Scan messages result shows CPU Chipset MTK MT6225 ... indicates the phone CPU type is MTK. Next..................... Last edited by Mcnbox; 10-06-2014 at 16:53.