GSM-Forum - View Single Post - 6270 camera operation failed & camera on standby error

Dr.kwak · 01-08-2010, 06:32

try to remove first the mmc, then check if it is working, if not replace flex cable check again if not change the upper board

01-08-2010, 06:32	#2 (permalink)
Dr.kwak Freak Poster Join Date: Nov 2008 Location: in front of you Posts: 147 Member: 894862 Status: Offline Thanks Meter: 21	try to remove first the mmc, then check if it is working, if not replace flex cable check again if not change the upper board