GSM-Forum - View Single Post

GodLike As · 01-24-2010, 20:47

Please ! Can somebody help me !

Using device: UFS3 SarasSoft
Interface: Tornado (www.ufsxsupport.com)
» UFxBoot V2.2 (c) SarasSoft 2003.
» UFS_USB V2.7 (c) SarasSoft 2005. (78768)
Sorry, UFS update failed !
UFS firmware is old, some function might not work properly.
EEPROM corrupted (BOX_AUTH_ERROR: 20), trying to repair ...
Sorry, UFS update failed !
UFS firmware is old, some function might not work properly.
UFS3 SarasSoft ready.
UFS3 SarasSoft disconnected.

and with another jaf box(not mine) i have another error..

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.11813, Date: 21-01-2010
Rpl backup already exist.
Processing file: rm512__06.75.mcusw as MCU
[DCT4,DCT4 ALGORITHM] size: 11.84 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166, 3168
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
BootLoader not responding, mostly RAM problem !
flashing terminated !
Flashing terminated with error(s) in 51.297 s
RX Buffer: F372

My J.A.F. box looks like in this picture...and of course it works well with P-key !

01-24-2010, 20:47	#1 (permalink)
GodLike As Junior Member Join Date: May 2006 Location: Piatra Neamt, Romania EU Posts: 37 Member: 273705 Status: Offline Thanks Meter: 34	Please ! Can somebody help me ! Please ! Can somebody help me ! Using device: UFS3 SarasSoft Interface: Tornado (www.ufsxsupport.com) » UFxBoot V2.2 (c) SarasSoft 2003. » UFS_USB V2.7 (c) SarasSoft 2005. (78768) Sorry, UFS update failed ! UFS firmware is old, some function might not work properly. EEPROM corrupted (BOX_AUTH_ERROR: 20), trying to repair ... Sorry, UFS update failed ! UFS firmware is old, some function might not work properly. UFS3 SarasSoft ready. UFS3 SarasSoft disconnected. and with another jaf box(not mine) i have another error.. Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.11813, Date: 21-01-2010 Rpl backup already exist. Processing file: rm512__06.75.mcusw as MCU [DCT4,DCT4 ALGORITHM] size: 11.84 MB Supported Ids: 3160, 3161, 3162, 3164, 3166, 3168 ASIC ID: 0x3168 [UPP_8M ver: 6.4] SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168 BootLoader not responding, mostly RAM problem ! flashing terminated ! Flashing terminated with error(s) in 51.297 s RX Buffer: F372 My J.A.F. box looks like in this picture...and of course it works well with P-key !