GSM-Forum - View Single Post

pinop · 01-28-2010, 18:26

1- clean i/o connector flex and pcb connector
2- replace i/o connector flex and pcb connector
3- replace 1 or 2 transistor under shield (check oxy), if no transistor available make jumper.
phone charge @ 290mA , stop charge after 5h, dont get hot and stby time is right.
probably transistor cut power when too hot or someting like.
if solved press thank!!

01-28-2010, 18:26	#1 (permalink)
pinop Junior Member Join Date: Jan 2004 Location: italy Posts: 10 Member: 50700 Status: Offline Thanks Meter: 12	3g no charge no usb solution 1- clean i/o connector flex and pcb connector 2- replace i/o connector flex and pcb connector 3- replace 1 or 2 transistor under shield (check oxy), if no transistor available make jumper. phone charge @ 290mA , stop charge after 5h, dont get hot and stby time is right. probably transistor cut power when too hot or someting like. if solved press thank!!