GSM-Forum - View Single Post

curvenger · 03-10-2010, 18:29

Anybody got Fly DS500 testpoint picture or pinout, i tried with the pinout included in the pinout directory, but its not working,, here it is:-

keyboard top
1.........20
3: Gnd
5: Gnd
6: Gnd
7: Power_B CPU2
9: Power_B CPU1
10: USB_DM
11: USB_DP
12: Rx CPU1
13: Tx CPU1
14: Rx CPU2
15: Tx CPU2
16: VBat
17: VBat
18: Charge/Usb power
19: Charge/Usb power
20: Gnd

i tried using pin 12=Rx, 13=Tx, 20=Gnd. error: boot phase#1 failed
next, reverse Tx and Rx but same error. i would appreciate it very much if anybody can show me the test point or the correct pinout or atleast the correct solution., BTW, will it work using CPU2 Tx and Rx?? ..also i dont have a Pinfinder. Thanks in advanced.

03-10-2010, 18:29	#1 (permalink)
curvenger No Life Poster Join Date: Apr 2009 Location: Mizoram>>Aizawl Posts: 676 Member: 1014781 Status: Offline Thanks Meter: 177	FLY DS500 test point or pinout needed??? Anybody got Fly DS500 testpoint picture or pinout, i tried with the pinout included in the pinout directory, but its not working,, here it is:- keyboard top 1.........20 3: Gnd 5: Gnd 6: Gnd 7: Power_B CPU2 9: Power_B CPU1 10: USB_DM 11: USB_DP 12: Rx CPU1 13: Tx CPU1 14: Rx CPU2 15: Tx CPU2 16: VBat 17: VBat 18: Charge/Usb power 19: Charge/Usb power 20: Gnd i tried using pin 12=Rx, 13=Tx, 20=Gnd. error: boot phase#1 failed next, reverse Tx and Rx but same error. i would appreciate it very much if anybody can show me the test point or the correct pinout or atleast the correct solution., BTW, will it work using CPU2 Tx and Rx?? ..also i dont have a Pinfinder. Thanks in advanced.