I tried All mode Auto then it had chosen file flash backup Vcall but i selected that file, my phone not connect phone with Phone TEST MODE and i tried select - 1 -2-3-4, it was'nt required file selected and not fix calibration!
Code:
COM16 [VCP0] selected
module v3.10
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0003:0002
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 1 min 26 sec
Remove/Install battery now !
Code:
==== [3/15/2010 6:56:25 PM] ====
COM16 [VCP0] selected
module v3.10
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0003:0002
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 2 min 16 sec
Remove/Install battery now !
Code:
==== [3/15/2010 6:59:56 PM] ====
COM16 [VCP0] selected
module v3.10
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0003:0002
status: FF
Connecting at 19200, wait...
warning: wrong packet cs
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 1 min 37 sec
Remove/Install battery now !
Code:
==== [3/15/2010 7:20:38 PM] ====
COM16 [VCP0] selected
module v3.10
Action: touchscreen calibration
mode: 4
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0003:0002
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 23 sec
Remove/Install battery now !