hello bro
the phone was dead, but if i try to power on, have a good respond
i need new file flash for blackberry chinese b100 (red casing)
NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_BP _EN1_TOSHIBA512_V004__firmware_20100413-053418.B4M.bin
i was try ffs area, but it has error
==== [4/13/2010 5:19:06 AM] ====
COM6 selected
module v3.11
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0043]: 0098:00F000800095 [TOSHIBA] TC58NWM9S3B
chip size: 64Mb
page/spare size: 0800/0040
pages/block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/01000000
firmware size: 48Mb
ffs size: 16Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: B300_BP_EN1_TOSHIBA512_V004
detect NAND info...
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: _BOOTLOADER_B300_BP_EN1_TOSHIBA512_V004.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_BP _EN1_TOSHIBA512_V004.BIN
project-id: B300_BP_EN1_TOSHIBA512_V004, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/01000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===> done
====================
New firmware detected (v.3.11, database date: 18.03.2010):
NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_BP _EN1_TOSHIBA512_V004.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare: 1-CLICK Web hosting - Easy Filehosting or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 48Mb
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: can not read memory: 0FAA:S_FT_READBACK_FAIL
error: last error: 0FAA:S_FT_READBACK_FAIL
Disconnect...
done
Finished, time used: 1 min 7 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?
==== [4/13/2010 5:20:17 AM] ====
COM6 selected
module v3.11
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can not boot device: 03E8:S_STOP
error: last error: 03E8:S_STOP
Disconnect...
done
Finished, time used: 14 sec
Remove/Install battery now !
In most cases you can read "firmware" instead of "full flash",
it may helps to save a lot of time with the same functionality.
Suggestion: read "firmware" now
Do you want to read "firmware" instead of "full flash" ?
==== [4/13/2010 5:20:50 AM] ====
COM6 selected
module v3.11
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can not boot device: 03E8:S_STOP
error: last error: 03E8:S_STOP
Disconnect...
done
Finished, time used: 25 sec
Remove/Install battery now !