| Timer: _2010_6_16_23_12_9>> Press ON/OFF key please...
Timer: _2010_6_16_23_12_11>> Target's hw_ver :0x0001
Timer: _2010_6_16_23_12_11>> Target's new hw_ver :0x8A04
Timer: _2010_6_16_23_12_11>> Target's hw_code :0x6235
Timer: _2010_6_16_23_12_11>> Target's sw_ver :0x8A01
Timer: _2010_6_16_23_12_12>> Get correct bootloader for target...
Timer: _2010_6_16_23_12_12>> MTK_AllInOne_DA_v3.0952.00.00
Timer: _2010_6_16_23_12_12>> DA--->6 is selected!
Timer: _2010_6_16_23_12_12>> You can release ON/OFF key!
Timer: _2010_6_16_23_12_12>> [DA] loading bootloader 1...
Success!Timer: _2010_6_16_23_12_20>> [DA] loading bootloader 2...
Success!Timer: _2010_6_16_23_12_28>> [BROM] start to test UART link...
Timer: _2010_6_16_23_12_28>> [DA] Check NOR flash IC...
Fail!Timer: _2010_6_16_23_12_30>> [DA] Check NAND flash IC...
Timer: _2010_6_16_23_12_30>> Waiting the bootloader initilize...
Timer: _2010_6_16_23_12_31>> [COM] Success to set baudrate!
Timer: _2010_6_16_23_12_31>> [DA] Bootloader running now,OK
Timer: _2010_6_16_23_12_38>> [DA] Can not get auto format address&size,by Mannul please!
Timer: _2010_6_16_23_12_39>> [DA] Start to read Target flash
Timer: _2010_6_16_23_12_39>> [DA] Backup NAND to:NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300 _GH_EN1_TY1G_JST_V005.bin
Timer: _2010_6_16_23_12_39>> Start:[0x00000000] size:[0x08000000]
Timer: _2010_6_16_23_12_39>> [DA] Nand data size 0x08400000 will be readed...
Timer: _2010_6_17_6_14_36>> [DA] file size:138412032Bytes
Timer: _2010_6_17_6_14_36>> [DA] Read full flash file complete!
i used other tool |