View Single Post
Old 07-10-2010, 08:45   #3 (permalink)
resident
Registered User
 
Join Date: Oct 2002
Location: turkmenistan
Posts: 94
Member: 16789
Status: Offline
Thanks Meter: 3
Hello!I erase whole flash and write back original backup file.
Code:
COM4 selected
module  v3.15
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19__fullflash_20100616-143711.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
converting data...
done 0x07C1F800 bytes
bootloader version: SCUD35_09A_BOOTLOADER_V005_MT6235B_3502_V02_19.bin
warning: ffs size mismatch: 05C1F800/06000000
nfi area detection finished: Ok
interface: BROM_DLL_v3.1012.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00D100900015 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: header is empty: probably flash chip completely erased
warning: can not detect header
nfi area detection finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===>  done
====================
New firmware detected (v.3.15, database date: 06.06.2010): 


This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare: 1-CLICK Web hosting - Easy Filehosting or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
nfi area detection...
converting data...
done 0x07C1F800 bytes
bootloader version: SCUD35_09A_BOOTLOADER_V005_MT6235B_3502_V02_19.bin
warning: ffs size mismatch: 05C1F800/06000000
nfi area detection finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN_5C5B3AE2].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN_5C5B3AE2_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235.[SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN_5C5B3AE2].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235._SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN_5C5B3AE2_.rpl
====================
warning: unknown rom info structure: SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN_5C5B3AE2
Unknown firmware detected (v.3.15, database date: 06.06.2010), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
  SCUD35_09A_PCB01_GPRS_MT6235B_S01.3502_V02_19.BIN
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare: 1-CLICK Web hosting - Easy Filehosting or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 10 min 24 sec
Remove/Install battery now !
Phone dead.Also i try option page+spare. Phone work only with NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.F35W_CL D_IV_TY1G_WIFI_V001__iPhone_128m
  Reply With Quote
 
Page generated in 0.09115 seconds with 7 queries