Hello i have a Lawow S20 i want to format it but i getting a error on complete mode formating........
COM5 [VCP0] selected
module v3.15
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1012.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU:
6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C0]: 0098:009E00000000 [TOSHIBA] TC58FYM7T8C
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00020000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6253:8A02:8A00
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: M301_V1.2.3
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: M301_PCB01_GPRS_MT6253_S00.M301_V1_2_3.BIN
project-id: M301_V1.2.3, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===> done
====================
New firmware detected (v.3.15, database date: 06.06.2010):
M301_PCB01_GPRS_MT6253_S00.M301_V1_2_3.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
http://rapidshare.com or
http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
error: can not format: HW_STORAGE_NANDis not present
Disconnect...
done
Finished, time used: 1 min 0 sec
Remove/Install battery now !