[vmf1990]

Thank u i repaired 5130 security failed with the 1st method

Originally Posted by MGT SOFTWARE

first step make full back up, and save,

secondly repair SD, sometime you may get error, do not worry,
go to the PMSolution for: "SECURITY_TEST failed!" and "warning: SD authorized but verify failed!"

If after repair SD and/or Simlock (Super Dongle RPL and Simlock RPL upload) you get "SECURITY_TEST failed!" and/or "warning: SD authorized but verify failed!".
This is comming usually because some PM fields and/or RPL sections are missing from your phone (e.g. DRM keys, CCC, ...).

Solution 1 (easy way, maybe not work all time, depends how phone was damaged):
- write full PM from SAME phone model C:\mobileEx\3.3\data\NOKIA BB5 PM Tested by Chevka
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

if still have problems, use Solution 2:

- backup RPL (NPC, CCC, HWC, ...), will call this ORIGINAL RPL
- backup RPL from another working phone (same model) with SAME product code
- edit this good RPL from another phone and remove NPC section (all lines who start with NPC_DATA_1 ... NPC_DATA_xx), will call this edited file CLONE RPL
- backup full PM from another working phone (same model) with SAME product code, will call this file CLONE PM
- full erase flash chip (use erase file regarding flash chip size)
- flash phone (CMT, APE, ...)
- upload CLONE RPL
- upload ORIGINAL RPL
- write full CLONE PM without fields 1,120,308,309
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

is there any possibility that we make backup first aND THEN TRY TO UNLOCK...........