GSM-Forum - View Single Post

srkhan · 09-06-2010, 11:05

Hi,

Here is all for micromax twinkle

Pin-finder pin-out
============
CPU: MT6235
result: Rx:4 Tx:5
time required: 18 sec
Trying to Power-On...
Power On !
===============

Firmware read by selecting Q5 in "MModule_v3.56.exe"

---------------------------------------------------------------------------------------
module v3.56
Device: Micromax-Q5
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (460800)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E580_MP_F1_IN_MMX_05.13
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E580_MP_F1_IN_ MMX_05_13.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: can not read memory: 0FB1:S_FT_NAND_READADDR_NOT_PAGE_ALIGNMENT
error: can not read area #1 (00062400-000663FF): 0FB1:S_FT_NAND_READADDR_NOT_PAGE_ALIGNMENT
startup code area #1 detection failed
rom info ver: 07
sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E580_MP_F1_IN_M MX_05_13.BIN
project-id: E580_MP_F1_IN_MMX_05.13, C673443E
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [protected] type, 1 record(s)
TCL-ID is absent
===> done
area size: 64Mb
number of areas/bytes to read: 1:04000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...

09-06-2010, 11:05	#1 (permalink)
srkhan No Life Poster Join Date: Jun 2005 Location: Sydney Posts: 2,660 Member: 153695 Status: Offline Sonork: srkhan Thanks Meter: 788	micromax Q55 pinout and FW Hi, Here is all for micromax twinkle Pin-finder pin-out ============ CPU: MT6235 result: Rx:4 Tx:5 time required: 18 sec Trying to Power-On... Power On ! =============== Firmware read by selecting Q5 in "MModule_v3.56.exe" --------------------------------------------------------------------------------------- module v3.56 Device: Micromax-Q5 Checking data, wait... Action: read flash NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M chip size: 64Mb page/spare size: 0200/0010 pages per block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: S_DA_RAM_ERROR done Set baudrate (460800)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 02000000/02000000 firmware size: 32Mb ffs size: 32Mb detect sec ro... detect custom parameters... detect project-id... project-id: E580_MP_F1_IN_MMX_05.13 detect NAND info... number of areas/bytes to read: 1:00034000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E580_MP_F1_IN_ MMX_05_13.bin nfi area detection (3 cores) finished: Ok TCL-ID detection... TCL-ID detection done startup code area #1 detection... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... error: can not read memory: 0FB1:S_FT_NAND_READADDR_NOT_PAGE_ALIGNMENT error: can not read area #1 (00062400-000663FF): 0FB1:S_FT_NAND_READADDR_NOT_PAGE_ALIGNMENT startup code area #1 detection failed rom info ver: 07 sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E580_MP_F1_IN_M MX_05_13.BIN project-id: E580_MP_F1_IN_MMX_05.13, C673443E code offset: 00000000 ffs offset/size [01]: 02000000/02000000 rom info structure: 2nd [protected] type, 1 record(s) TCL-ID is absent ===> done area size: 64Mb number of areas/bytes to read: 1:04000000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...