Quote:
Originally Posted by @@@___@@@ i will try to unlock my set my set is b-239 ( my old card is complete work )
i will try also rebiled but i will fail..... my set screen show " AUTO NONE " MY CABAL IS ALSO GOOD .... Code: COM5 [VCP0] selected
module v1.29
Device: Samsung-SCH-B239, B259, B279
operation: SP-unlock
Phone should be Switched ON !
connecting...
Connecting, wait...
error: can't activate test mode
If phone can not be connected after several tries make this:
1. Insert original sim card in phone
2. Power-On phone
3. go to Menu, press 6 then * and type password 123456
4. go to "Port Map", HKF
5. select "UART1"
error: operation failed
Finished, time used: 26 sec THIS SETTING ALSO OK.... Code: 1. Insert original sim card in phone
2. Power-On phone
3. go to Menu, press 6 then * and type password 123456
4. go to "Port Map", HKF
5. select "UART1" |
Hello,
Perform Unlock Operation Without UIM Card And Auto None Problem Also Caused By Bad Contacts Of Cable Try To Check cable If not Ok Then You Can try Solder Cable On Golden Points Pinouts Already Included In Infinity Shell Try it Will Solve Your Problem
Wbr
<<<Megatron>>>