GSM-Forum - View Single Post

adityajha · 11-10-2010, 12:05

for those who have this kind of problem coming in ur ufs3.

UFSx Device: UFS3 SarasSoft, USB S/N: ------
-- Setup Ok
--Login fail.

Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- UFSx Device: UFS3 SarasSoft, USB S/N: -----
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Target Id : 62 CF 0 0
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: Xx.x C4EEC8, ,
-- UFSx S/N : --------
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TWISTER

orrrrrrrr

than u can fix ur box by this solution...

1st install pony-pong
2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box.
u can see ways here also

now do connection in pony pong like
1st select AVR micro than Atmega8
now click on seup and go in interface setup asn select parallel - Avr ISPI/IO
now click on probr if test is ok than click ok
New Microsoft PowerPoint Presentation.ppt

now click on erese all.
now open programe memory and open device memory
u can get it from hereufs_repair_BIN.rar

now click on command and click "write all"

after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread.
or u can also meet me on [email protected]

ur box will be come back again.

11-10-2010, 12:05	#1 (permalink)
adityajha No Life Poster Join Date: Dec 2009 Location: siliguri,india Age: 31 Posts: 665 Member: 1183572 Status: Offline Thanks Meter: 203	ufs boot error solution 100% tested. for those who have this kind of problem coming in ur ufs3. UFSx Device: UFS3 SarasSoft, USB S/N: ------ -- Setup Ok --Login fail. Reset Failed, Trying to Repair UFS ... -- Boot: 62 CF -- UFSx Device: UFS3 SarasSoft, USB S/N: ----- -- Reset Failed, Trying to Repair UFS ... -- Boot: 62 CF -- Target Id : 62 CF 0 0 -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003. -- UFSx Firmw.: Xx.x C4EEC8, , -- UFSx S/N : -------- -- Features : 00000001 -- Licence 5 : True -- UFSx Vendor: TWISTER orrrrrrrr than u can fix ur box by this solution... 1st install pony-pong 2nd make connection of miso,mosi,reset,sack of Atmaega ic of ufs box. u can see ways here also now do connection in pony pong like 1st select AVR micro than Atmega8 now click on seup and go in interface setup asn select parallel - Avr ISPI/IO now click on probr if test is ok than click ok New Microsoft PowerPoint Presentation.ppt now click on erese all. now open programe memory and open device memory u can get it from hereufs_repair_BIN.rar now click on command and click "write all" after sucess fully this operation open HWK update client and see status of ur box and also update box frimwere.if any oter error is coming then post in this thread. or u can also meet me on [email protected] ur box will be come back again.