@all
Hi,,, check here:
1. Make sure to 100% remove all boxes (except ATF) from your USB PORT...
2. In Device Manager, make sure the Driver Version of your USB to Serial Converter A and
B are year 2009 or above versions. If it is below year 2009, then you need to
download this:
http://www.ftdichip.com/Drivers/CDM/CDM20808.zip
and update the drivers for USB to Serial Converter A and B
*** Restart PC after updating the drivers...
3. Go here --- > C:\AdvanceBox Turbo Flasher\Driver\MProg 3.5 Release\
4. Run "Mprog.exe"
5. Click "File" ---> "Open" then select "new abox turboflasher.ept" file
6. Click "Device" ---> "Erase"
7. Click "Device" ---> "Program"
After successfully Programming, close MPROG software and disconnect ATF Box from
PC for 5 seconds... Then reconnect it.
It will ask for drivers,,, select the correct one here:
C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS
B/R
X