nexian G923
1 phone = restart
1 phone other = dead phone
success all
-----------------
use boot 5, baut 921600
---------------------------------------------------------------------------
Welcome to use McnBox!
Selected COM26
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.08
Checksum CF7E-E6BE
Box Connected!
Ready working at COM26
-------------------------------
Start Scanning...
->.......
Results:
CPU: MT6225.
GND:8 10,RXD:3,TXD:1
[G:8 10 R:3 T:1] Apply to Box
[G:8 10 R:3 T:1] Apply to Box
The File Information:
TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E506B_PR1 _F1_WAM_ID_TELKMOSEL_01_02.BIN
>>
The File Information:
TINNO25_08A_GEMINI_PCB01_GPRS_MT6225_S00.E506B_PR1 _F1_WAM_ID_TELKMOSEL_01_02.BIN
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6225 Ver: 8A05 SW:8A00
CPU ID: 03060400
Initialize Boot5 ...
Flash Type: [SPANSION] S29WS256N
Flash(Nor) Code: 0001227E(22302200)
Flash(Nor) Size: 0x02000000 Hex Bytes
Set Baud Done
Start Writing(Nor)...
Write Done ! |