[pulian]

news about this phone?

i have coral 680 for unlock, first read full firmware then i formated but phone in logo. Then i restore backup but phone turn off, dead complety

any idea

==== [29/12/2010 11:07:23 a.m.] ====
COM3 [Serial2] selected
module v3.25
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0026]: 0020:00A100000015 [ST] ST01GR3B
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: C2096_1.27_0x1211F_DIGICEL_NUMO
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: CELLONSZ35_09A_BOOTLOADER_V005_MT6235B_C2096_1_27_ 0X1211F_DIGICE
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.C2096_1_27_0 X1211F_DIGICEL_NUMO.BIN
project-id: C2096_1.27_0x1211F_DIGICEL_NUMO, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.25, database date: 30.11.2010):
CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.C2096_1_27_0 X1211F_DIGICEL_NUMO.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\Documents and Settings\PULI@N\Escritorio\coral680_digicel_CELLON SZ35_09A_PCB01_GPRS_MT6235B_S01.C2096_1_27_0X1211F _DIGICEL_NUMO__firmware_20101229-111628.B4M.bin
Disconnect...
done
Finished, time used: 9 min 51 sec
Remove/Install battery now !

==== [29/12/2010 11:21:17 a.m.] ====
COM3 [Serial2] selected
module v3.25
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0026]: 0020:00A100000015 [ST] ST01GR3B
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: C2096_1.27_0x1211F_DIGICEL_NUMO
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: CELLONSZ35_09A_BOOTLOADER_V005_MT6235B_C2096_1_27_ 0X1211F_DIGICE
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.C2096_1_27_0 X1211F_DIGICEL_NUMO.BIN
project-id: C2096_1.27_0x1211F_DIGICEL_NUMO, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.25, database date: 30.11.2010):
CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.C2096_1_27_0 X1211F_DIGICEL_NUMO.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
warning: can not format: HW_STORAGE_NOR is not present
Format (HW_STORAGE_NOR)...
Disconnect...
done
Finished, time used: 1 min 7 sec
Remove/Install battery now !