E2121B & E2120 blink DONE using z3x and FREE soft
PROBLEM
E2121B and E2120 blink
TOOLS TO BE USED
z3x samsung activated
FREE SOFTWARE
j750 cable
ACTION TAKEN
E2121B i flash many time and so many fw but no luck so i desided to erase EEPROM. so luckyly successfull
1. open shell type E2121B
2. click read info
3. click erase EEP
4. load this firmware e2121b fw for blink.rar - 4shared.com - online file sharing and storage - download
5. click firmware
6. hit unlock
note: if the imei is 000000000 you need to built imei and re- unlock.
in my case the imei still intact so i re-unlock
E2121B
logs
Code:
Selected model: E2121B
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Start TFS format... OK
Start NOR flash
NOR flash - ok
Start Flash TFS
TFS flash - ok
Start Flash CSC
CSC format - ok
CSC flash - ok
Download - ok
Elapsed time: 732 second, sw ver: 3.4.0076
-----------------------------------------------------------------------
ACTION TAKEN
Quote:
i flash in z3x successfully ok when i open. but when i insert the sim the unit is still blinking.
i flash it again the problem is still blinking when i put sim card
so i used free software luckyly done |
you need dowload first lordceltech free soft samsung e2120.rar - 4shared.com - online file sharing and storage - download
1. ustpro2box [as interface]
2. serial port [ depend your port]
3. boundrate 921xx
4. clik start
5. load bin
6. load tfs
7. check box power on after download
8. click bin + tfs
9. hit DOWNLOAD
wait untill finish its take a minute [wait wag mainip pera yan]
E2120 USING FREE SOFT
